GL300S Geothermal Drilling Deep Water Well Drill Rig 77KW 330m Depth

GL300S is a 300m crawler water well drilling rig. This crawler water well drilling rig is capable of drilling boreholes up to a depth of 330m with a drilling diameter of 105-300mm.

It can operate in loose layer or bedding rock conditions and can use either Top Hammer Hydraulic Rotating and feeding, Down the hole hammer or mud pump drilling method.

The rig is equipped with a diesel engine with 77KW power and has a weight of 7.8T.

It has a fast lifting speed of 20m/min and a fast forwarding speed of 40m/min.

The rotary torque is 8900 N.M with a rotary speed of 30/170r/min. The rig has a lifting force of 20T and a winch lifting force of 1.5T.

It has a high leg stroke of 1.35-1.5m and can operate at an uphill angle of 21°. The drilling efficiency is 10-35m/h, and it has a moving speed of 2.5Km/h.

Optional accessories include a mud pump, centrifugal pump, generator, and foam pump.

Max drilling depth: 330m - This means that this drilling rig is capable of drilling boreholes up to a depth of 330 meters, making it suitable for a wide range of water well drilling applications.

Drilling diameter: 105-300mm - The rig can drill boreholes with a diameter ranging from 105mm to 300mm, allowing it to be used for a variety of water well drilling projects.

Air pressure: 1.25-3.5Mpa - The rig is equipped with an air compressor that can provide air pressure between 1.25 to 3.5 megapascals (Mpa). This air pressure is used to power various drilling tools and equipment.

Air consumption: 16-55m³/min - The rig's air consumption ranges from 16 to 55 cubic meters per minute (m³/min), depending on the drilling conditions and the type of drilling tools being used.

Rod length: 3m/6m - The rig can use drill rods with lengths of either 3 meters or 6 meters, depending on the drilling depth and the specific drilling requirements.

Glorytek Corporation located in China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades.

We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.Our factory covers an area of 250,000 square meter, construction area is about 150,000 square meter, having machining machinery, CNC processing center, friction welding machine, testing equipments etc. over 200 sets and more than 600 employees.

Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering，underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.

Due to the continuous effort and improvement, Glorytek’s market share keeps increasing rapidly, meanwhile, the perfect after-sales service is providing a strong support and guarantee for the expanding of business cooperation. Till now, we enjoy the good reputation and our products have been winning the confidence of a lot of domestic and overseas customers like Canada, Australia, Nigeria, Pakistan, Russia, Ethiopia, Indonesia, Malaysia, etc. more than 30 countries.