DF300 6*4 Truck Type Borehole Drilling Rig Powered by Diesel Engine
for 300m Water Well Drilling
Description:
The truck chassis of the DF300 Truck Type Borehole Drilling Rig is
Dongfeng 6×4 special drilling rig chassis, whose model is
DFS1251GL18, and it meets the emission standard China III. Powered
by Yuchai YC6J180-33 diesel engine, it is no problem to drill 300m
water wells.
Besides the DF300 6*4 Truck Type Borehole Drilling Rig, we are also
specialized in suitable mud pump, air compressor and full set of
drilling tools, such as drill rods, DTH hammer and bit, tricone
bit, PDC bit, adaptors, etc.
Features:
1. The hydraulic system adopts an open system, and the operation of
getting on and off the car is separated to avoid misoperation. It
is equipped with oil temperature heater in winter and oil
temperature radiator in summer to adapt to the heating and heat
dissipation of hydraulic oil in different seasons.
2. This borehole drill rig adopts an auxiliary rod unloading
cylinder; it is used to push the ratchet teeth of the rotary table
so as to unload the thread of the drill pipe joint, and then use
the rotary table to reverse the unloading rod to prevent the impact
force from damaging the rig gearbox when unloading the rod.
Tehnical Parameter:
| Nominal drilling depth (M) | 300 |
| Nominal hole diameter of turntable (mm) | 500 |
| Turntable speed (r/min) | 8.6-142 |
| Turntable torque (kN.m) | 38.9-2.4 |
| Main winch single rope pulling force of (kN) | 30 |
| Lifting capacity of main hook (kN) | 240 |
| Single rope pulling force of auxiliary winch (kN) | 30 |
| Lifting force of secondary hook (kN) | 120 |
| Drill tower bearing capacity (kN) | 240 |
| Effective height of drilling tower (mm) | 11900 |
| Kelly rod (mm) | Φ108×108×7500 |
| Drill rod (mm) | Φ88.9×9.8×5500 |
| Power | Generator model | HH100/R6105AZLD-1 100kW |
| Main rig | Y225S-4 37kW/1470rpm |
| Mud pump | Y225S-4 37kW/1470rpm |
| Hydraulic pump | YE2-160M-4 11kW/1470rpm |
| Mud pump | Model | BW850/20 |
| Bore (mm) | 150 |
| Displacement (L/min) | 850, 600 |
| Pump pressure (MPa) | 2, 3 |
| Input power (kW) | 40 |
| Truck chassis | Chassis model | DFS1251GL18 |
| Chassis form | 6×4 |
| Engine | model | YC6J180-33 |
| Type | Water-cooled four-stroke supercharged and inter-cooled |
| Rated power (kW) | 132 |
| Rated speed (rpm) | 2500 |
| Dimension | Working status (mm) | 10500×2480×13700 |
| Transport state (mm) | 12500×2480×3700 |
Company Profile
Glorytek Industry (Beijing)Co.,Ltd., is an integrated corporation specialized in manufacturing and
exporting top quality drilling equipment and drilling parts for
decades. We are supported and assisted by a highly experienced team
of designers and engineers that enable us to complete all the
assigned projects successfully as per the specified requirement
from our clients.Our factory covers an area of 250,000 square
meter, construction area is about 150,000 square meter, having
machining machinery, CNC processing center, friction welding
machine, testing equipments etc. over 200 sets and more than 600
employees.
Our products are widely used in the scope of mining, water well
drilling and exploration, anchor grouting project, side slope
protection engineering, oil and gas engineering, underwater rock
drilling & blasting operations of seaport channel, hydropower
project, national defense projects ect.
Jane Cheng
Sales Representative
Glorytek Industry ( Beijing ) Co., Ltd.
Address:No.B-2507, DongWeiCheng, GuanZhuang,Chao Yang District,
Beijing, China.
Tel: +86-10-52864265/52864786
Fax: +86-10-52037270
Mobile:+86-13426420230
